SBL820EF

Features

Full colour touch screen HMI. This self-diagnostic system is easy to operate and helpful for troubleshooting throughout each section of the platen.
Computerized foil control system via full colour touch screen HMI.
Standard 3 shafts foil feeding system, which are individually programmable. Each shaft is on telescopic shafts for easy foil loading.
Unique, airshaft foil rewind device, to ensure the foil rewinds accurately which also allows easy waste foil removal.
8 heater zones, all individually programmable from HMI
Hologram foil registration system (OPTION).
Pneumatic honeycomb and cutting plate locking system to eliminate loose mechanical parts.
Automatic on/off impression system with tonnage searching pre-set program.
Maximum 200 tons of pressure for both foil stamping and die-cutting.
Sheet transport to front lays monitored and controlled by photoelectric sensors
Standard equipment includes operator and drive side push/pull side lay, with micro photoelectric sensors.
High Strength alloy gripper bars.
Single point gripper opening system for easy feed and transport through platen, stripping and delivery sections.
Non-stop feature in both Feeder and Delivery section.
Wide range of stock from thin paper to B-flute.
Full CE safety accreditation.

Additional specs:

Maximum Sheet Size

815mm x 605mm

Minimum Sheet Size

320mm x 280mm

Maximum Die-Cutting Paper Size

805mm x 590mm

Minimum Gripper Margin

9.5mm

Die-Cutting Output Force

200 ton

Inner Size of Cutting Chase

926mm x 618mm

Lower Cutting Plate Size

848mm x 600mm

Material Handling Range

0.1mm - 2mm (80gsm - 1400gsm)

Corrugated Board Range

≦ 4mm

Recommended Cutting Rule Height

23.60mm

Maximum Cycle Speed

8,500cph

Maximum Operating Speed

8,000sph

Registration Tolerance

+0.075mm

Total Power Requirement

30KvA

Machine Outer Dimensions

L - 4174mm / W - 1869mm / H - 2366mm

Approximate Weight

10ton

Feeder Pile Height (pallet)

1200mm

Feeder Pile Height (non-stop-system)

1300mm

Delivery Pile Height

1040mm