SBL820LEF (EXTENDED VERSION)
Features
- Full colour touch screen HMI. This self-diagnostic system is easy to operate and helpful for troubleshooting throughout each section of the platen.
- Computerized foil control system via full colour touch screen HMI.
- Standard 3 shafts foil feeding system, which are individually programmable. Each shaft is on telescopic shafts for easy foil loading.
- Unique, airshaft foil rewind device, to ensure the foil rewinds accurately which also allows easy waste foil removal.
- 8 heater zones, all individually programmable from HMI
- Hologram foil registration system (OPTION).
- Pneumatic honeycomb and cutting plate locking system to eliminate loose mechanical parts.
- Automatic on/off impression system with tonnage searching pre-set program.
- Maximum 200 tons of pressure for both foil stamping and die-cutting.
- Sheet transport to front lays monitored and controlled by photoelectric sensors
- Standard equipment includes operator and drive side push/pull side lay, with micro photoelectric sensors.
- High Strength alloy gripper bars.
- Single point gripper opening system for easy feed and transport through platen, stripping and delivery sections.
- Non-stop feature in both Feeder and Delivery section.
- Wide range of stock from thin paper to B-flute.
- Full CE safety accreditation.
Specifications
Maximum Sheet Size
815mm x 605mm
Minimum Sheet Size
320mm x 280mm
Maximum Die-Cutting Paper Size
805mm x 590mm
Minimum Gripper Margin
9.5mm
Die-Cutting Output Force
200ton
Inner Size of Cutting Chase
926 x 618 mm
Material Handling Range
0.1mm~2mm (80~1400gsm)
Corrugated Board Range
≦4mm
Recommended Cutting Rule Height
23.60mm
Maximum Operating Speed
7,500 cycles per hour
Registration Tolerance
±0.075mm
Total Power Requirement
30KVA
Machine Outer Dimensions
5010L × 1869W × 2366H
Approximate Weight
11ton